Exploring the stemflow dynamics and driving factors at both inter- and intra-event scales in a typical subtropical deciduous forest

Numerous efforts have been made to understand stemflow dynamics under different types of vegetation at the inter-event scale, but few studies have explored the stemflow characteristics and corresponding influencing factors at the intra-event scale. An in-depth investigation of the inter- and intra-event dynamics of stemflow is important for understanding the ecohydrological processes in forest ecosystems. In this study, stemflow volume (F_V), stemflow funnelling ratio (F_R), and stemflow ratio (F_%) from Quercus acutissima and Broussonetia papyrifera trees were measured at both inter- and intra-event scales in a subtropical deciduous forest, and the driving factors, including tree species and meteorological factors were further explored. Specifically, the F_V, F_R and F_% of Q. acutissima (52.3 L, 47.2, 9.6%) were lower than those of B. papyrifera (85.1 L, 91.2, 12.4%). The effect of tree species on F_V and F_% was more obvious under low intensity rainfall types. At the inter-event scale, F_V had a strong positive linear correlation with rainfall amount (G_P) and event duration (D_E) for both tree species, whereas F_R and F_% had a positive logarithmic correlation with G_P and D_E only under high-intensity, short-duration rainfall type. F_R and F_% were mainly affected by wind speed and the maximum 30-min rainfall intensity under low-intensity, long-duration rainfall type. At the intra-event scale, for both tree species, the mean lag time between the start of rainfall and stemflow was the shortest under high-intensity, short-duration rainfall type, while the mean duration and amount of stemflow after rain cessation were the greatest under high-amount, long-duration rainfall type. The relationship between stemflow intensity and rainfall intensity at the 5-min interval scale also depended greatly on rainfall type. These findings can help clarify stemflow dynamics and driving factors at both inter- and intra-event scales, and also provide abundant data and parameters for ecohydrological simulations in subtropical forests.     

A two-layer model for studying 2D dissolved pollutant runoff over impermeable surfaces

Dissolved pollutants in stormwater are a main contributor to water pollution in urban environments. However, many existing transport models are semi-empirical and only consider one-dimensional flows, which limit their predictive capacity. Combining the shallow water and the advection–diffusion equations, a two-dimensional physically based model is developed for dissolved pollutant transport by adopting the concept of a ‘control layer’. A series of laboratory experiments has been conducted to validate the proposed model, taking into account the effects of buildings and intermittent rainfalls. The predictions are found to be in good agreement with experimental observations, which supports the assumption that the depth of the control layer is constant. Based on the validated model, a parametric study is conducted, focusing on the characteristics of the pollutant distribution and transport rate over the depth. The hyetograph, including the intensity, duration and intermittency, of rainfall event has a significant influence on the pollutant transport rates. The depth of the control layer, rainfall intensity, surface roughness and area length are dominant factors that affect the dissolved pollutant transport. Finally, several perspectives of the new pollutant transport model are discussed. This study contributes to an in-depth understanding of the dissolved pollutant transport processes on impermeable surfaces and urban stormwater management.     

基于低成本单频u-blox接收机的GPS/BDS定向性能分析

针对高精度GNSS定向应用场景，通过实验对比对低成本单频u-blox接收机的数据质量和解算精度。结果表明，u-blox接收机GPS、BDS观测值的信噪比略低于测量型接收机；伪距精度分别为0.91 m、0.56 m，相位精度分别为1.35 cm、1.20 cm。在静态观测环境下，u-blox的定向精度可以达到航向0.2°/m和俯仰0.4°/m；动态环境下解算结果稍差，但也可以达到航向0.3°/m和俯仰0.6°/m，略低于高成本测量型接收机单频数据的实时动态定向精度。     

湘西金矿复杂地层大口径充填孔定向钻进技术

根据湘西金矿深厚陡倾角地层的特点，采用传统防斜方法（如满眼组合防斜技术、钟摆组合防斜技术）不能保证钻孔垂直度，首次使用随钻测斜仪配合螺杆定向钻进先施工引导孔，再用气动潜孔锤冲击回转钻进快速完成大口径充填孔扩孔，取得了较好的效果。采用螺杆能较好地实现定向钻进，钻孔轨迹偏斜位移能被控制在8.67 m范围内。     

岩溶山区崩滑灾害变形破坏地质模式分类

岩溶山区特殊的地质结构导致崩塌、滑坡等地质灾害时常发生，带来了严重的人员伤亡和经济社会损失。研究岩溶山区崩滑灾害特征，建立相应的变形破坏地质模式，对于岩溶山区崩滑灾害风险防控与治理工程具有重要理论意义与指导价值。文章以典型地质灾害形成演化过程为例，在系统地分析研究区典型崩滑灾害地质背景、影响因素、动力学与运动学特征的基础上，提出了岩溶山区崩滑灾害变形破坏地质模式，得出以下主要结论:（1）影响崩滑成灾基本因素（崩滑灾害体势能、岩溶结构面、岩组结构、斜坡地貌和斜坡结构）、影响因素（水文地质条件、工程活动、地震、降雨）和变形运动特征（运动形式和变形机制）三个方面，据此建立了岩溶山区崩滑灾害地质分类指标体系。（2）结合研究区特征对模型体系里面的每个要素进行系统分析，崩滑灾害的发生是各个要素相互组合、相互作用的结果。（3）总结了研究区内5种典型崩滑地质模式:高势能反倾降雨型高速远程滑坡—碎屑流模型、高势能斜倾视向采矿型高速远程崩滑灾害模型、超高势能横向陡倾地震型高速远程滑坡、高势能采矿型高速崩塌—碎屑流模型、低势能差异风化崩塌模型。为后续开展物理模拟、数值模拟、稳定性计算和变形破坏预测等工作奠定基础。下一步将更加深入全面地建立研究区的崩滑灾害模式，并进行崩滑灾害的危险性分级工作。      

地质科技论文作者署名与致谢的编写规则及方法

在搜集、学习相关资料的基础上,对地质科技论文作者署名与致谢的编写规则与写作方法形成较为系统的认识,作者署名是科技论文的重要组成部分,要努力掌握其编写规则与写作方法。署名的编写时要明白作者署名的意义,要遵守作者署名的编写规则、要了解通讯作者的意义与编写方法,要真实客观地提供作者的相关信息。必要时,可在文末编写致谢。     

湘黔桂新元古代拉伸纪晚期地层年代格架对比及关键地质事件初探

湘黔桂地区发育一套完整的新元古代拉伸纪晚期地层(下江群及其相当地层),是研究扬子克拉通与华夏板块碰撞拼接后华南大陆裂谷盆地演化的重要载体。本文报道了贵州省铜仁市万山区清水江组上部、平略组底部及中部变质凝灰岩和沉凝灰岩的年龄,分别为(763.8±5.5) Ma(N=24,MSWD=0.29)、(760.2±4.1) Ma(N=25,MSWD=0.39)、(759.1±3.9) Ma(N=26,MSWD=0.38)。通过对湘黔桂地区下江群及其相当地层中已有火山岩、火山碎屑沉积岩、含凝灰质岩石年龄的系统梳理与分析研究,进一步确定下江群其及相当地层的沉积时限在822~715 Ma,桂北丹洲群三门街组玄武岩是在武陵造山后伸展背景下湘黔桂地区裂谷最大裂陷时期的产物,清水江组与平略组内大量的火山物质可能来源于江南造山带东段800~760 Ma的中酸性喷出岩。结合地层、岩性、年代特征,本文恢复了湘黔桂盆地新元古代拉伸纪晚期的演化历史,并认为该套地层符合建立下江系条件。     

微量硫化物、硫酸盐硫同位素EA-IRMS在线测试分析

常规EA-IRMS硫同位素测试中, 硫化银(Ag2S)的需样量为0.2~1.0 mg, 硫酸钡(BaSO4)的需样量为0.35~1.5 mg, 较大的需样量已难以满足珍贵样品及微区样品的分析要求, 因此如何减少测试样品量已成为EA-IRMS测试分析工作中急需解决的问题。通过对EA-IRMS测试系统的研究发现, 在采用常规方法测试样品时, 由于初始He载气流速(100 mL/min)、进入分流接口时的流速(10 mL/min)与进入离子源时流速 (0.3 mL/min)的差异导致样品燃烧产生的目标气体中99.7%的气体被浪费, 样品的总体利用率仅有0.3%。因此如何减少样品在测试过程中的损耗, 提高样品的利用率, 从而减少需样量的关键在于缩小载气流速的差距。本实验在常规EA-IRMS测试技术基础上进行了关键改进,在元素分析仪和分流接口之间设计增加一个由六通阀和自动加热冷阱构成的装置, 自动加热冷阱可在Load模式时收集SO2气体, 六通阀在Load-Inject模式之间切换时可改变He载气流速, 通过与分流接口匹配的反吹He载气(10 mL/min)将冷阱中富集的SO2气体送入分流接口, 从而保证进入分流接口前样品燃烧产生的SO2气体全部收集。这一改进, 理论上可以将样品的利用率提高10倍, 该系统需硫量降至3~13 μg, 并且可以提高反应管的寿命, 降低清灰的频率, 提高工作效率。同时有效避免了拖尾的产生, 提高分析结果的精密度。本次微量样品实验获得的硫同位素数据与常规方法一致, 分析精度优于0.15‰(1SD), 测量值与真值的差异在0.4‰以内, 达到国际同类实验室先进水平。此外, 该方法可为微量有机碳、氮同位素EA-IRMS测试分析工作的开展提供参考经验。     

辽东铀成矿带连山关地区韧性剪切带与铀成矿作用

连山关地区位于华北克拉通北缘铀成矿省辽东铀成矿带，已知铀矿床（点）均发育在韧性剪切带附近。为了解韧性剪切带运动学、几何学构造变形机制及与铀矿的关系，本文以连山关岩体周缘韧性剪切带为研究对象，通过野外宏观调查和室内微观研究相结合的研究方法，探讨构造变形期次、韧性剪切带形成机理及其对铀成矿的控制作用。研究表明：连山关岩体周缘发育的韧性剪切带与近南北向挤压构造变形有关，其右行韧性剪切带应变类型为压扁应变，属于一般压缩-平面应变范围，Flinn指数K值在0.19~0.69之间，岩石类型属于S/SL型构造岩。研究区内铀矿体均为隐伏盲矿体，主要赋存于沿着连山关岩体和辽河群接触带右行剪切作用形成的背斜褶皱核部，和北东东向断裂关系密切。综合分析认为，连山关岩体南缘北西向韧性剪切带为一级控矿构造，是区内铀矿热液运移的通道，而剪切带边部的晚期北东东向断裂则是铀矿储存空间；铀源可能来自于太古宙古风化壳，并在大型韧性剪切活动（提供热液运移通道）和基性脉岩侵入（提供热源和还原剂）等综合因素作用下运移、富集成矿。     

阿勒泰地区植被覆盖度及ET对气温变化的响应

研究气温对植被覆盖度和ET (Evapotranspiration，ET)的影响，对干旱区应对气候变化、维系生态系统稳定具有重要意义。基于阿勒泰地区及周边7个气象站，CRU数据集中的气温数据及MODIS ET数据，采用Mann-Kendall非参数检验、植被盖度反演等方法，对阿勒泰地区气温变化对植被覆盖度及ET的影响进行了研究。结果表明：（1）在1901—2016年过去的116 a间，阿勒泰地区年平均气温以0.18 ℃·(10 a)^-1速率增加，在1982年由突变前的2.2 ℃增加到突变后的3.5 ℃。（2）2000—2017年阿勒泰地区植被覆盖度变化的空间差异明显，植被覆盖度增加的面积与降低的面积总体相当；全区66.71%的区域植被覆盖度变化与气温呈负相关，而呈正相关的比例仅占18.55%，且全区气温变暖而盖度降低区域的占比达31.71%。（3）2000—2016年阿勒泰地区ET总体呈降低趋势，整个区域61.65%的面积温度降低、ET降低，而19.92%的区域表现为温度增加而植被ET降低。